Nicholson DS steam trap
For vertical installation. Fast start up and operation. Maintance free. Longlasting valve and seat.
Downloads
Description
Thermal actuator is filled at its free length with a liquid having a lower boiling point than water. On start-up, the valve is normally open to discharge air, non-condenibles and condensate. When steam enters trap, the thermal actuator fill vaporizes to a pressure higher than line pressure. This forces the valve into seat orfice to prevent any further flow. As condensate collects, it takes heat from the actuator, lowering internal pressure. The line pressure will then compress thermal actuator to open the valve and discharge the condensate. Valve opening automatically adjusts to load conditions from minimum on very light loads to full lift at maximum load.
For vertical installation.
Fast start up and operation. Maintance free. Longlasting valve and seat.
The DS-serie is complete ASME-BPE. Two-year guarantee.
| Connection | ½” and ¾” ASME BPE |
| Material | - Body: 316 L |
| Connections | Tri-clamp or tube end |
| Finish (internal) | 0.51 µM Ra |
| Max temp. | To 170 degrees |
| Max pressure | To 10.3 barg (150 PSIG) |
| Certificates | - Every part has a heat number for complete traceability - FDA-certificates |
Opties
- Certificates: MTR, COC
